general-management IDD

GENERIC-MQTT & GENERIC-MQTTS

Overview

This page describes the GENERIC-MQTT and GENERIC-MQTTS service interface of general-management which allows (with operator role or proper permissions) to get some information about the hosting system’s behavior, such as log entries and configuration settings. It is implemented using protocol, encoding as stated in the following tables:

GENERIC-MQTT

Profile type	type	Version
Transfer protocol	MQTT	3.1 and 3.1.1
Data encryption	N/A	-
Encoding	JSON	RFC 8259
Compression	N/A	-

GENERIC-MQTTS

Profile type	type	Version
Transfer protocol	MQTT	3.1 3.1.1
Data encryption	TLS	-
Encoding	JSON	RFC 8259
Compression	N/A	-

Hereby the Interface Design Description (IDD) is provided to the general-management – Service Description. For further details about how this service is meant to be used, please consult that document.

Interface Description

get-log

The service operation request requires an MQTTRequestTemplate JSON encoded message in which the authentication is a proper identity info and the payload is a LogRequest.

Topic: arrowhead/authentication/general/management/get-log

{
  "traceId": "<trace-id>",
  "authentication": "<identity-info>",
  "responseTopic": "<response-topic>",
  "qosRequirement": "<0|1|2>",
  "payload": {
    "pagination": {
      "page": 0,
      "size": 5,
      "direction": "ASC",
      "sortField": "entryDate"
    },
    "from": "2025-03-07T00:00:00Z",
    "to": "2025-03-08T00:00:00Z",
    "severity": "INFO"
  }
}

The service operation responds with an MQTTResponseTemplate JSON encoded message in which the status code is 200 if called successfully. The response template payload is a LogResponse.

{
  "status": "200",
  "traceId": "<trace-id>",
  "receiver": "<receiver-system-identifier>",
  "payload": {
    "entries": [
      {
        "logId": "1d61efc1-fb39-11ef-b55e-2cf05d74cdac",
        "entryDate": "2025-03-07T09:46:59.203Z",
        "logger": "eu.arrowhead.authentication.AuthenticationMain",
        "severity": "INFO",
        "message": "Starting AuthenticationMain using Java 21.0.5 with PID 13072 (omitted)"
      },
      {
        "logId": "1d9b9d62-fb39-11ef-b55e-2cf05d74cdac",
        "entryDate": "2025-03-07T09:46:59.212Z",
        "logger": "eu.arrowhead.authentication.AuthenticationMain",
        "severity": "INFO",
        "message": "No active profile set, falling back to 1 default profile: \"default\""
      },
      {
        "logId": "1e2d2f03-fb39-11ef-b55e-2cf05d74cdac",
        "entryDate": "2025-03-07T09:47:00.973Z",
        "logger": "eu.arrowhead.common.http.filter.authorization.ManagementServiceFilter",
        "severity": "INFO",
        "message": "ManagementServiceFilter is active"
      },
      {
        "logId": "1e4cec04-fb39-11ef-b55e-2cf05d74cdac",
        "entryDate": "2025-03-07T09:47:01.058Z",
        "logger": "eu.arrowhead.authentication.http.filter.InternalAuthenticationFilter",
        "severity": "INFO",
        "message": "InternalAuthenticationFilter is active"
      },
      {
        "logId": "1f529c35-fb39-11ef-b55e-2cf05d74cdac",
        "entryDate": "2025-03-07T09:47:02.897Z",
        "logger": "eu.arrowhead.authentication.quartz.CleanerConfig$$SpringCGLIB$$0",
        "severity": "INFO",
        "message": "Cleaner job is initialized."
      }
    ],
    "count": 26
  }
}

The error codes are 400 if the request is malformed, 401 if the requester authentication was unsuccessful, 403 if the authenticated requester has no permission and 500 if an unexpected error happens. In these cases the response template payload is an ErrorResponse JSON.

{
  "status": "400",
  "traceId": "<trace-id>",
  "receiver": "<receiver-system-identifier>",
  "payload": {
    "errorMessage": "Invalid time interval",
    "errorCode": 400,
    "exceptionType": "INVALID_PARAMETER",
    "origin": "arrowhead/authentication/general/management/get-log"
  }
}

get-config

The service operation request requires an MQTTRequestTemplate JSON encoded message in which the authentication is a proper identity info and the payload is a List<Name>, which contains the names of the desired configuration properties.

Topic: arrowhead/authentication/general/management/get-config

{
  "traceId": "<trace-id>",
  "authentication": "<identity-info>",
  "responseTopic": "<response-topic>",
  "qosRequirement": "<0|1|2>",
  "payload": [ "management.policy", "max.page.size" ]
}

The service operation responds with an MQTTResponseTemplate JSON encoded message in which the status code is 200 if called successfully. The response template payload is a ConfigResponse.

{
  "status": "200",
  "traceId": "<trace-id>",
  "receiver": "<receiver-system-identifier>",
  "payload": {
    "map": {
      "management.policy": "authorization",
      "max.page.size": "1000"
    }
  }
}

The error codes are 400 if the request is malformed, 401 if the requester authentication was unsuccessful, 403 if the authenticated requester has no permission and 500 if an unexpected error happens. In these cases the response template payload is an ErrorResponse JSON.

{
  "status": "401",
  "traceId": "<trace-id>",
  "receiver": "<receiver-system-identifier>",
  "payload": {
    "errorMessage": "Invalid identity token",
    "errorCode": 401,
    "exceptionType": "AUTH"
  }
}